Driver for the Xerox XPRESS Plotter

Running the xpress_plot Utility

xpress_plot has a number of command line option; to see a summary use the -h command line option:

          $  ./express_plot  -h

Testing the Installation

You should run the following tests on the plot server to determine that you have a working connection to the XPRESS plotter: Make sure that the device driver is installed. For the purposes of this document we assume that it is called /dev/express0.

  • Verify that xpress_plot can communicate with the XPRESS plotter by sending it a "test unit ready" message, using the tur command line option;

              $ ./xpress_plot    /dev/xpress0   tur
    

    a successful exchange should return the following:

              xpress_plot: test_unit_ready
              Device '/dev/xpress0' is ready
    

    An exchange may not be successful if the plotter is turned off, if some other application is using the plotter or if the device driver is not installed. Error messages include:

    plotter turned off (after a few minutes                /dev/xpress0: I/O error

    device driver in use by another application        /dev/xpress0: Device busy

    missing or wrong driver                                   /dev/xpress0: No such file or directory

  • Issue an inquire command to the EXPRESS plotter.

              $ ./xpress_plot /dev/xpress0   inquire   0x00   
    

    You should get in return:

              xpress_plot: get_inquiry
    
              xpress_plot: get_sense
    �����     Sense, status = 0x0
    
    �����     Query: Standard, status = 0x0
    
    �����     Standard:
    �������      Vendor ID: XEROX�� 
    �������      Product ID: Xpress��������� 
    �������      Product Version: 0067
    
    �����     xpress_plot: get_sense
    �����     Sense, status = 0x0
    
  • Generate/Send a Monochrome Test Plot

              $ ./xpress_plot /dev/xpress0 monotest 5 5
    

    this should cause the plotter to plot a 4x4 black and white checkerboard pattern 5 inches on a side using the A0 roll.

  • Generate/Send a Color Test Plot

              $ ./xpress_plot /dev/xpress0 colortest 3 3� -quality:6 -roll:2
    

    causes the plotter to plot a 4x4 CYMK checkerboard pattern 3 inches on a side on the A1 roll.

  • Checking Paper Roll Status

              $ ./xpress_plot /dev/xpress0 inquire 0xc1
    

    should result in a response:

              xpress_plot: get_inquiry
    �����     xpress_plot: get_sense
    �����     Sense, status = 0x0
    
    �����     Query: Roll information, status = 0x0
    
    �����     Roll information:
    
    �������   Roll�������� Size�   Has Paper����� Width����� Width
    �����������������������������������          (dots)���� (inch)
    ����� 
              Roll1��������� A0�����  yes��������25920����� 36.00
    ������    Roll2��������� A1�����  yes��������16838����� 23.39
    ������    Roll3��������� A3�����  no����������� 0�����  0.00
    ������    Roll4�������� A0R�����  no����������� 0�����  0.00
    
              xpress_plot: get_sense
    
              Sense, status = 0x0
    

  • Page   |    1    |    2    |    3    |    4    |    5    |    6    |    7    |    8    |



    Back to FAQ Page Artwork Home